Tag Archives: worm

Confirmed, the new RA worm is working well

Finally another clear night presented itself last night, and I replicated my testing of PE with the new RA worm block in place.

I tried data gathering with longer exposures, but didn’t like what it was telling me, then realized I was on the wrong track anyway;  I should keep my data gathering to short exposures and let the fact that I am averaging the PE over multiple worm cycles handle smoothing out the seeing.  This is consistent with all the advice in the Bisque support forum too.  So I increased to gathering more worm cycles – 7 cycles.

Uncorrected, the worm is averaging out at 1.2 arcseconds peak-to-peak, and even looking at the raw data, the worst case swing is 2.9 arcseconds. That difference shows the seeing jitter.  This is really good performance – the guaranteed spec from Bisque is 7 arcseconds, so the worm is ‘way outperforming that, and is below seeing.

Then another 7 cycles with PEC turned on:0.4 arcseconds peak-to-peak residual error with correction running (averaged out over the 7 worm cycles), with max including big seeing spikes of 2 arcseconds.


I tried a quick image with guiding turned on.  I’ve lost the guider log, but with 3-second guide exposures and light aggressiveness (40%) it was holding the image to under 1/2 pixel.  The resulting image in this 5-minute exposure has nice round stars:

This seems to be avoiding an obvious question: what does an unguided image of some substantial length look like? I didn’t see the point of doing that test yet, since unguided imaging is substantially enhanced by ProTack, which I haven’t configured yet.

Next clear night (several days away) i’ll do a small TPoint run to re-check polar alignment, then a large TPoint run to build a good model, then do some experiments with PEC, TPoint, and ProTrack all turned on, to see how long unguided exposures can be.

These TPoint runs will be much easier, and more accurate, now that I have installed the SkyShed’s PZT so I can roll the roof right out of the way.  Previous TPoint runs involved having to chase the scope around the sky with roof rotation – both inconvenient, and also likely introducing vibration.